- High Efficiency Solid State Design
- Full Power into Load VSWR up to 2:1
- BITE to LRU
- Remote Control
T-10000A 10 Kilowatt High Power Transmitter System
Product Specifications
Download PDF-
General
Frequency Range: 1.5 – 30 MHz
Frequency Stability: ±1 x 10-8 Per Day
Power Output and VSWR Performance: - 10 kW PEP and Average ±1 dB for VSWR Less Than/Equal To 2:1; Selectable in 1 dB Steps Down To 1 kW
- Reduced Power for VSWR Less Than/Equal To 3:1; Self-Protected from Open / Short Circuits
- Custom: ±0.5 dB
Duty Cycle: Continuous
Tuning Steps: 1 Hz Minimum
Transmit Activation Time: 7 ms Maximum for 90% Output Power With Band Change Per MIL-STD-188-203-1A
Modes of Operation: AME, NB-FM, USB, LSB, ISB, CW; Data Modes Such As STANAGs 4285, 4259, 4481, 4539, and 4203, RATT, Link 11 / 22 and MIL-STD-188-110 A / B With External Modems
Key: Local or Remote
Remote Control: Remotely Controllable Through T-9000D; Designed For Unattended Continuous Operation
Post-Selector Operation: Automatic With F-9800; F-9800 Bypasses at 1.5 – 1.6 MHz
Output Impedance: 50 Ohm Nominal, Unbalanced
Output Connector: 7/8 Inches EIA Flange (1 5/8 Inches With Adaptor)
Tuning Control: Initiated By T-9000D and Digitally Controlled; No Operator Intervention Required
Input Power: 338 – 458 VAC 3 Phase, 50 / 60 Hz
Power Consumption: Less Than/Equal To 35 kVA
Metering: TFT Display on HPC and T-9000D; Analog Metering On IPA-1500
BITE: Power Up, Surveillance, and Operator-Initiated; Fault Isolation to the IPA Level; Reporting and Resetting Through T-9000D and Remote Control
MTBF: 10000 Hours (Estimated)
MTTR: 60 Minutes
Dimensions: - 100.5 H x 42.0 W x 31.5 L (in)
- 255.3 H x 106.7 W x 80.0 L (cm)
Weight: 2367 lbs (1075.9 kg) Estimated, Unpacked
Construction: Modular Plug-In Assemblies, Field Serviceable
Origin: Designed and Manufactured in the U.S.A.
-
Transmitter
Harmonic Suppression: At Least 60 dB Below Carrier
Intermodulation Distortion: At Least 36 dB Below PEP
Carrier Suppression: Better Than 70 dB Below PEP
Undesired Sideband: Better Than 70 dB Below PEP
In Band Noise: Better Than 50 dB Below PEP
Audio Input Impedance: 600 Ohm Balanced
Audio Response: ±1 dB from 300 – 3050 Hz
Audio: 0 dB Nominal; Adjustable to ±20 dB
-
Peripheral Equipment Options
Spares Kits: Running Spares, Field Modules, Final Tested Sub-Units
AC Power Control: Remote ON/OFF
-
Environmental
Temperature: - Operating: -20°C to +45°C (-4°F to 113°F)
- 45°C to 55°C (113°F to 131°F) @ Reduced Duty Cycle
Humidity: 95% @ +55°C, Non-Condensing
Altitude: - Operating: Up to 10,000 Feet
- Storage: Up to 40,000 Feet
Cooling: Forced Air; Fan-Cooled
Air Source and Volume: Clean Filtered Air
Exhaust Air: External Exhaust Recommended